Safety Data Sheet

Down-Under Personal Odour Shield

Odour neutraliser

Version6
Issue / revision date08 September 2026
Previous issue25 March 2026
SupplierDown-Under Personal Odour Shield
No matching SDS sections found.
1Chemical Product and Company Identification

1.1 Product Identifier

Product Name:

Down-Under Personal Odour Shield

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses:

Odour neutraliser

1.3 Details of the Supplier of the Safety Data Sheet

Supplier/distributor:

Down-Under Personal Odour Shield
36 Roberts Road
MORNINGTON VIC 3931 AUSTRALIA
PH: 0413 880 077
email: lifescopeinc@gmail.com

1.4 Emergency Telephone Number

Emergency Telephone:

Not available

2Hazards Identification

2.1 Classification of the substance or mixture

Product Definition:

Mixture

Classification:

Not applicable

Poisons Schedule:

Not applicable

2.2 Label Elements

Signal Word:

Not applicable

Hazard Pictogram(s):

Not applicable

Hazard Statement(s):

Not applicable

Precautionary Statement(s):

Storage: P102 – Keep out of reach of children.

2.3 Other Hazards

Other hazards:

None known

3Composition/Information on Ingredients

3.1 Substance Composition

CAS No.% by weightIngredient
Not Available>99Ingredients determined not to be hazardous
61788-85-0< 1PEG-40 Hydrogenated Castor Oil
532-32-1<1Sodium Benzoate
24634-61-5 / 590-00-1<1Potassium Sorbate
127-91-3 / 19902-08-0<1beta-Pinene
80-56-8<1alpha-Pinene
5392-40-5<1Citral
84696-51-5 / 8008-79-5<1Spearmint Oil
8008-51-3<1Camphor Oil
8007-70-3 / 84775-42-8 / 84650-59-9<1Anise Oil
97-53-0<1Eugenol
91771-67-4<1Eucalyptus Polybractea Oil
10482-56-1 / 98-55-5 / 2438-12-2 / 7785-53-7 / 8000-41-7<1alpha-Terpineol
87-44-5 / 13877-93-5 / 1407-53-0<1beta-Caryophyllene
68917-75-9 / 90045-28-6<1Wintergreen Oil
8022-15-9 / 8000-28-0 / 8016-78-2<1Lavender Oil
91771-47-0<1Cedarwood Oil
4First Aid Measures

4.1 Description of first aid measures

Eye Contact:
  • Wash out immediately with fresh running water.
  • Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids.
  • Seek medical attention without delay; if pain persists or recurs seek medical attention.
  • Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
Skin Contact:
  • Flush skin and hair with running water and soap if available.
  • Seek medical attention in event of irritation.
Inhalation:
  • If fumes, aerosols or combustion products are inhaled, remove from contaminated area.
  • Other measures are usually unnecessary.
Ingestion:
  • Immediately give a glass of water.
  • If swallowed do NOT induce vomiting. Seek immediate medical advice.
  • If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration.
  • Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious.
  • If in doubt, contact a Poisons Information Centre or a doctor.

4.2 Most important symptoms and effects, both acute and delayed

Eye Contact:

No specific symptoms known.

Skin Contact:

No specific symptoms known.

Inhalation:

No specific symptoms known.

Ingestion:

No specific symptoms known.

4.3 Indication of any immediate medical attention and special treatment needed

Advice to Doctor:

Treat symptomatically.

5Firefighting Measures

5.1 Extinguishing media

There is no restriction on the type of extinguisher which may be used.

Use fire-extinguishing media suitable for the surrounding area.

5.2 Special hazards arising from the substance or mixture

Hazardous combustion products:
  • Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result.
  • May emit poisonous and/or corrosive fumes.
  • Carbon Monoxide (CO), Carbon Dioxide (CO2) and oxides of Sodium and Potassium may be liberated on combustion.
  • Other pyrolysis products typical of burning organic material.

5.3 Advice for firefighters

Protective actions during firefighting:
  • Alert Fire Brigade and tell them location and nature of hazard.
  • Wear breathing apparatus plus protective gloves in the event of a fire.
  • Prevent, by any means available, spillage from entering the drains or water courses.
  • Use fire fighting procedures suitable for surrounding area.
  • DO NOT approach containers suspected to be hot.
  • Cool fire exposed containers with water spray from a protected location.
  • If safe to do so, remove containers from path of fire.
  • Equipment should be thoroughly decontaminated after use.
Fire/Explosion Hazard:
  • No additional data available.
6Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures

Personal precautions:

6.2 Environmental Precautions

Environmental Precautions:

6.3 Methods and material for containment and cleaning up

Methods for cleaning up:
  • Clean up all spills immediately.
  • Avoid contact with eyes.
  • Control personal contact with the substance, by using protective equipment.

6.4 Reference to other sections

For waste disposal, see Section 13.

7Handling and Storage

7.1 Precautions for safe handling

  • Avoid contact with incompatible materials.
  • When handling, DO NOT eat, drink or smoke.
  • Keep container securely sealed when not in use.
  • Avoid physical damage to containers.
  • Always wash hands with soap and water after handling.
  • Use good occupational work practice.
Storage:
  • Store in original container.
  • Check regularly for spills and leaks.
  • Check that containers are clearly labelled.
  • Keep container securely sealed.

7.2 Conditions for safe storage, including any incompatibilities

Storage precautions:

Stable at normal, ambient temperatures.

Suitable container:

Packaging as recommended by manufacturer - polyethylene or polypropylene containers.

Storage incompatibility:

Store away from sources of ignition, heat and oxidising agents.

7.3. Specific end use(s)

Specific end use(s):

As detailed in Section 1.2

8Exposure Controls/Personal Protection

8.1 Control Parameters

Ingredient comments:

None

8.2 Exposure Controls

Protective Equipment:

Appropriate engineering controls:
  • Local exhaust ventilation usually required.
  • If risk of overexposure exists, wear approved respirator. Correct fit is essential to obtain adequate protection. Supplied-air type respirator may be required in special circumstances. Correct fit is essential to ensure adequate protection.
  • Provide adequate ventilation in warehouse or closed storage area.
  • Provide eye wash station.
Eye/face protection:
  • Avoid contact with eyes.
  • Use safety glasses with side shields in accordance with standard EN166 or AS/NZS 1337.1.
  • Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practical. Lens should be removed at the first signs of eye redness or irritation, in a clean environment only after works have washed hands thoroughly.
Skin/hands/feet protection:
  • Gloves must be worn only on clean hands.
  • After using gloves, hands should be washed and dried thoroughly.
  • Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374, AS/NZS 2161.1.
  • Gloves must be selected according to the application and duration of use at the workstation.
  • Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may behandled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.
  • Recommended properties: Impervious gloves in accordance with standard EN374 or AS/NZS 2161.1
  • Wear safety footwear or safety gumboots, e.g. rubber.
Other protection:
  • Overalls.
Respiratory protection:
  • Provide adequate ventilation, especially in confined areas.
  • Wear respirator as appropriate.
9Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Appearance:

Liquid.

Colour:

Colourless to pale yellow.

Odour:

Characteristic - floral with fruity backnotes.

pH:

7.0 - 8.0

Flashpoint:

66°C

9.2 Other Information

Other information:

None.

10Stability and Reactivity

10.1 Reactivity

Reactivity:

No known reactivity hazards associated with this product

10.2 Chemical Stability

Stability:

Stable at normal, ambient temperature under the recommended handling and storage conditions.

10.3. Possibility of hazardous reactions

Possibility of hazardous reactions:

10.4. Conditions to avoid

Conditions to avoid:

10.5. Incompatible materials

Materials to avoid:
Hazardous decomposition products:
11Toxicological Information

11.1. Information on toxicological effects

Acute toxicity:

No additional data available.

Skin irritation/corrosion:

No additional data available.

Serious eye damage/irritation:

No additional data available.

Respiratory or skin sensitisation:

There is sufficient evidence to classify the material as being sensitising to skin or respiratory system.

Mutagenicity:

No additional data available.

Carcinogenicity:

No additional data available.

Reproductivity:

No additional data available.

STOT - single exposure:

No additional data available.

STOT - repeated exposure:

No additional data available.

Aspiration hazard:

No additional data available.

Inhalation:

This material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified by EC Directives using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting.

Ingestion:
  • Accidental ingestion of the material may be damaging to the health of the individual.
  • Nonionic surfactants may produce localised irritation of the oral or gastrointestinal mucosa and induce vomiting and mild diarrhoea.
  • Large oral doses of salicylates may cause mild burning pain in the throat, stomach and usually prompt vomiting. Several hours may elapse before the development of deep and rapid breathing, lassitude, nausea, vomiting, thirst and occasional diarrhoea.
Skin contact:
  • Skin contact is not thought to have harmful health effects (as classified under EC Directives); the material may still produce health damage following entry through wounds, lesions or abrasions.
  • Skin irritation may also be present after prolonged or repeated exposure; this may result in a form of contact dermatitis (nonallergic). The dermatitis is often characterised by skin redness and swelling which may progress to blistering, scaling and thickening of the epidermis.
  • Open cuts, abraded or irritated skin should not be exposed to this material.
Eye contact:
  • Although the liquid is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may produce transient discomfort characterised by tearing or conjunctival redness (as with windburn).
Chronic:
  • Skin contact with the material may be capable of inducing a sensitization reaction.
  • Inhalation of the material may be capable of inducing a sensitization reaction.
  • Pulmonary sensitization, resulting in hyperactive airway dysfunction and pulmonary allergy may be accompanied by fatigue, malaise and aching.
12Ecological Information

12.1. Toxicity

Ecotoxicity:

Not applicable

12.2 Persistence and degradability

Persistence and degradability:

No information available at this time

12.3 Bioaccumulative potential

Bioaccumulative potential:

No information available at this time

12.4 Mobility in soil

Mobility:

The product is soluble in water.

12.5 Results of PBT and vPvB assessment

PBT and vPvB assessment:

No information available at this time.

12.6 Other adverse effects

Other adverse effects:

Harmful to aquatic organisms.

13Disposal Considerations

13.1. Waste treatment methods

Product/packaging disposal:

Not applicable.

14Transport Information

14.1 UN number

Not applicable

14.2 UN Proper Shipping Name

Not applicable

14.3 Transport hazard class(es)

Not applicable

14.4 Packing group

Not applicable

14.5 Environmental hazards

Not applicable

14.6 Special precautions for user

Not applicable

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code

Not applicable

14.8 Labels Required

Not applicable

15Regulatory Information

15.1 Safety, health and environmental regulations / legislation specific for the substance or mixture

Classified according to EEC directives:

According information available, this material is not classified.

15.2 Chemical safety assessment

No chemical safety assessment has been carried out.

16Other Information

The information and data provided in this Safety Data Sheet (SDS) is believed to be accurate and has been compiled from sources believed to be accurate.

It is offered without warranty of any kind, expressed or implied, for the correctness or completeness of the information.

This SDS relates only to the specific material designated heron and may not be valid for any material used in combination with any other materials or processes.

Odour Management Australia assumes no legal responsibility or liability for the use of or reliance upon the data and information herein and shall be held harmless from any claim arising from the use of or reliance upon the data and/ or information, including any claims for inaccuracies, incomplete or otherwise misleading data.

SDS Dates and Revisions

Version:

6

Date of issue/date of revision:

2026-09-08T06:37:17.830Z

Date of previous issue:

46106

This webpage is a browser-friendly presentation of the supplied Safety Data Sheet. Safety information has been retained from the source workbook.